Furuno LCD DISPLAY MU-155C Manual de usuario descargar pdf (Pagina 23)

4.3 Choosing Source for Main Picture

Choose the signal to display on the entire screen as follows:

1. Press the [DISP] key to show the DISP selection window.

Signal names can be changed. For detail, see “3.3.2 Changing the signal name”.

DISP selection window

2. Press the [▲] or [▼] key to select a signal.

You can also select the signal by pressing the [DISP] key continuously.

RGB1-2: The signal from the chosen RGB port is displayed on the entire screen.

DVI: The signal from the DVI port is displayed on the entire screen.

VIDEO1-3: The external video from the appropriate VIDEO port is displayed on the

entire screen.

3. Press the [◄] or [► ] key to close the window.

The window is erased when there is no operation within five seconds.

Note: The name of the selected signal appears at the right top corner for five seconds after

the DISP selection window is erased.

RGB1

RGB2

DVI

VIDEO1

VIDEO2

VIDEO3

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Sin comentarios

Furuno LCD DISPLAY MU-155C Manual de usuario Pagina 23